工商區上午落單下午貨到 訂購表格下載適用於 Laser Printer :
Capacity : 7,000 pages @ 5% coverage
香港原裝行貨
支持環保,你我出一分力. 由現在起至2009年10月31日凡購買本公司任何產品,你的原裝舊碳粉盒或便可回收當作現金使用,詳情如下.
由現在起至2009年10月31日凡購買本公司任何產品,你的原裝舊碳粉盒或便可回收當作現金使用,詳情如下.
Brother 原裝碳粉黑色盒1支 - $10 減免 Brother 原裝彩色碳粉盒1支 - $15 減免 Brother 原裝Drum 1 個 - $15 減免
要瞭解更多這個回收計劃，可聯絡我們的客戶服務中心，電話: 3188 1911
Title:How do I replace the toner cartridge?
Follow the procedure below to replace toner cartridges.
Caution Do NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. Press the front cover release button and then open the front cover. Take out the drum unit and toner cartridge assembly. Caution We recommend that you put the drum unit and toner cartridge assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner. To prevent damage to the printer from static electricity, DO NOT touch the electrodes shown in the illustration. Push down the blue lock lever and take the toner cartridge out of the drum unit. Caution DO NOT put a toner cartridge into a fire. It could explode, resulting in injuries. Handle the toner cartridge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once. To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations Note Be sure to seal up the toner cartridge tightly in a bag so that toner powder does not spill out of the cartridge. Discard the used toner cartridge according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office. Unpack the new toner cartridge. Hold the cartridge level with both hands and gently rock it from side to side five or six times to spread the toner evenly inside the cartridge Caution Wait to unpack the toner cartridge until immediately before you put it in the printer. If toner cartridges are left unpacked for a long time the toner life will be shortened. If an unpacked drum unit is put in direct sunlight or room light, the unit may be damaged. Put the toner cartridge in the drum unit immediately after you have removed the protective cover. To prevent any degradation to the print quality, DO NOT touch the shaded parts shown in the illustrations. Pull off the protective cover. Put the new toner cartridge firmly into the drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically. Caution Make sure that you put in the toner cartridge properly or it may separate from the drum unit. Clean the primary corona wire inside the drum unit by gently sliding the blue tab from right to left and left to right several times. Caution Be sure to return the tab to the home position (1). If you do not, printed pages may have a vertical stripe. Put the drum unit and toner cartridge assembly back in the printer. Close the front cover.
Press the front cover release button and then open the front cover.
Take out the drum unit and toner cartridge assembly.
Push down the blue lock lever and take the toner cartridge out of the drum unit.
Pull off the protective cover.
Put the new toner cartridge firmly into the drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically.
